Wall putty important and features

0
ACC Wall Putty (Cement Base)
Description Wall Putty is water based, fine powder that gives the smooth finish for further application of all kinds of paints. Using  wall putty, you can prevent the flaking of your expensive paints ruining your most beautiful looking walls. It is specially formulated to be used as base coat to cover up uneven surfaces of cement plastered walls and concrete surfaces for exteriors and interiors.
Usage It is ideal base for concrete, cement plastered walls and ceiling. It can be used in both interior and exterior surface that fills all the pin holes and pores of plaster surface.
Features

- Water repelling properties

Provides smooth finish for further application

Durable and better adhesive strength

Minimize the problem associated with porosity difference.

Particulars Pack Size

Available pack sizes are

20Kg 40KG

 

Practical Coverage The spreading capacity of this product will vary considerably according to
the roughness and porosity of the surface. On smooth of average porosity 18-20m2 /Ltr./coat.
No. of Coats Apply two coat of Acc wall putty.
Finish Matt finish
Application Details Recommended Tools 1.Brush
Cleaning Up Clean all the equipment with clean and soapy water after use.
Drying Time HD: 12–14 Hours
SD: 2-3 HoursDrying times may vary depending on temperature, humidity, air movements and film thickness
Surface Preparation Ensure that the new or previously painted surface is clean and free from grease, dust or any loose paints. Make sure that surface is just wet; over-wetting of surface should be avoided. If there is problem on the plastered surface due to salty water or salt in sand, it should be treated with mild acid before the application of ACC wall putty else wall putty will not stick to the wall and problem of flake may arise. After 30 minutes of treating the surface with mild acid, wash the surface thoroughly so that no acid remain on the walls.
Application Instructions

-Stir the container well before use.

-Allow the surface to dry completely after washing it thoroughly. Now the surface will be ready for ACC wall putty to be applied.

-Apply ACC wall putty on large holes and cracks to cover it in the ration of 2:1 and allow it to dry.

Sprinkle water over the ACC wall putty applied surfaces for few days to get the better result.

Storage and Handling Storage Store the tightly closed container in a secure upright position in a cool, dry place.
Flash Point Non-flammable
Stability of thinned Paint Use within 18 hours.
Shelf Life 2 years from the date of manufacture in original tightly closed container away from excessive heat.
Brand

Acc wall putty,Asian wall putty are major best wall putty in Nepal

 

May 31, 2019 |

Leave a Reply

Your email address will not be published.

18 + two =

Copyright 2015 by Nepal Construction. All Rights Reserved.
Skip to toolbar